Omix-Ada, Inc. – Installation Instructions
1997-2004 Jeep Wrangler standard and Automatic. (18303.10)
2005-2006 Jeep Wrangler with 6 Speed Manual. (18303.11)
3” Body Lift Kit
Step 1: Remove the fuel filler neck.
Step 4: Loosen Radiator
Step 5: Remove Light Bezel.
Step 8: remove Body Bolts
Picture shows position of the of the body pucks.
Body pucks 9 – 10 – and 11 are the opposite side of 4-3-and 2.
Please remove the body pucks in the following order:
Remove the factory body puck (1) from under the grille -16 mm socket
Leave body pucks 9/10/11 on opposite side of Jeep loose, but not off!
Step 9: Lift body off frame on one side
Step 10: Install body pucks
Steps 1: Steps 2:
No 4 – tighten No 5 – tighten
No 5 – start it, do not tighten No 8 – tighten
No 3 – tighten No 6 – tighten
No 2 – tighten No 7 – tighten
No 9 – tighten
No 8 – start it, do not tighten
No 10 – tighten
No 11 – tighten
No (1) will be tightened in the very last step. Do not tighten at this time.
Get the file Download here | File PDF